# Pset on Alignment2DSegment

**URL:** <https://forums.buildingsmart.org/t/pset-on-alignment2dsegment/1544>\
**Category:** Infrastructure\
**Created:** [June 25, 2019, 4:01pm UTC](https://forums.buildingsmart.org/t/pset-on-alignment2dsegment/1544 "2019-06-25T16:01:45Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![TLiebich](https://sea2.discourse-cdn.com/flex016/user_avatar/forums.buildingsmart.org/tliebich/32/71_2.png) [@TLiebich](https://forums.buildingsmart.org/u/TLiebich)\
**Post date:** [June 26, 2019, 9:16pm UTC](https://forums.buildingsmart.org/t/pset-on-alignment2dsegment/1544/4 "2019-06-26T21:16:41Z")

</div>

Hi, the support of alignment is new to IFC, first introduced in IFC4.1 and updated in IFC4.2 (currently candidate status). Check [technical website](https://technical.buildingsmart.org/standards/ifc/ifc-schema-specifications/) for definitions.

In IFC4.1, only the IfcAlignment can hold property sets, where you can add such information for the whole alignment.

In IFC4.2 there is a new entity, [IfcReferent](https://standards.buildingsmart.org/IFC/DEV/IFC4_2/FINAL/HTML/link/ifcreferent.htm), that defines a certain position along the alignment from which onwards certain criteria are applied. You can use this to define a design speed and other criteria.

IFC4.3 (in development) will add additional support for road and railway, this is what @sergej refers to.

---

_[View the full topic](https://forums.buildingsmart.org/t/pset-on-alignment2dsegment/1544)._
